Handlebars

A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)

The Carbon Streem features an extremely aggressive wing-shaped top section that saves watts while providing an incredibly comfortable hand position for cruising uphill. The drops feature a traditional bend-the choice of many Ritchey-sponsored pro riders - UCI compliant 43.5x16mm wing-shaped top section cuts through the wind - Gentle sweep to tops and broad platform-great for seated climbing - Internal cable groove-no need to tape all the way to the stem - No-slip grit at stem and brake lever clamp areas - Fully internal routing for Shimano Di2 EW-RS910 Junction box - Carbon monocoque - Compatible w/ Shimano EW-RS910 junction box/end plug + internal routing - Measured center-to-center where the levers mount - 31.8mm center section - Drop/Reach: 38cm = 130/75mm; 40, 42, 44cm = 130/80mm - Available in matte UD carbon finish - 195g (42mm)

The WCS Carbon Trail Flat +/-5mm Handlebar is two bars in one: select 5mm of rise or drop while maintaining a 9-degree sweep. Great for 29er's and other bikes with tall front ends. - +/- 5mm rise - Matte UD carbon finish - Width: 740mm - Sweep: 9 degrees - 180g

Same proven Ritchey quality, performance, and materials now beefed up and available in trail-worthy widths. A shallow rise and gentle sweep are the key attributes of the WCS Trail Rizer bar. The extra-wide grip area allows plenty of room for all components and remotes of choice. - Material: carbon fiber - Width: 780mm - Rise: 15mm - Backsweep: 9° - Upsweep: 6° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 199g

The evolution of Ritchey handlebars continues with the WCS ErgoMax. This new bar enjoys a rich history of handlebar design and development and combines it with the modern demands of discerning riders who enjoy riding varying surfaces. Designed to enhance control and comfort when riding along loose surfaces, the ErgoMax is ideal for a gravel bike since it places the hands in a wider, more stable position while in the drops. The ErgoMax is just as perfectly situated on road bikes that are built for endurance, its ergonomics delivering unparalleled comfort. The bar tops employ a 10mm rise at the clamping area, which offers a slightly more upright riding position. They are then ovalized and have a slight 4-degree rearward sweep to more evenly distribute the weight of the rider's hands and wrists, also putting them in a more natural position. Continuing with an eye towards ergonomics, the ErgoMax also features drops with a nice, 12-degree flare to keep the rider's hands in a comfortable and confident position, while also adding a bit more unobstructed stability when turning or sprinting. The new Ritchey ErgoMax bar delivers more control, welcome comfort, and increased confidence when riding gravel, setting out on multi-day adventures, or rolling along those long miles of tarmac. - Material: triple-butted 7050 alloy - Bend style: compact - Top style: flat - Drop: 128mm - Reach: 73mm - Drop flare: 12° - Flare out: 3° - Backsweep: 5° - Clamp diameter: 31.8mm - Accessory mount diameter: 31.8mm - Other features: drilled at bar end for Shimano Di2 EW-RS910 junction box routing, C260 compatible - Clip-on compatibility: no - Other features: C260 not compatible - Weight: 270g (42cm)

The 2X bar packs the material technology, strength, and weight you expect from a Ritchey bar with an additional +/-5mm of height adjustment. - Material: triple-butted 7050 alloy - Width: 740mm (with cutting marks*) - Rise: reversible +/- 5mm flat rise - Backsweep: 5° and 9° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 232g - Cutting must be done by a professional mechanic or Ritchey authorized dealer, though cutting or modifying any Ritchey product will void the warranty.

The 2X bar packs the material technology, strength, and weight you expect from a Ritchey bar with an additional +/-5mm of height adjustment. - Material: triple-butted 7050 alloy - Width: 740mm (with cutting marks*) - Rise: reversible +/- 5mm flat rise - Backsweep: 5° and 9° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 232g

Light and compliant for incredible durability and a supple, refined ride, the Ritchey Rizer bar is the choice for XC riders looking for race quality at an attainable price. - Material: triple-butted 7050 alloy - Width: 760mm (with cutting marks*) - Rise: 20 and 30mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 242g - Cutting must be done by a professional mechanic or Ritchey authorized dealer, though cutting or modifying any Ritchey product will void the warranty.

Built from a lifetime of riding and racing experiences and inspired by life itself, the latest generation of the Ritchey WCS Streem brings fully internal cable routing to this legendary handlebar. The Streem bar has long combined the performance and advantage of an aero bar with all-day comfort. A generous aero-formed top section provides sleek performance and ergonomic support. While its comfort is bolstered by the stress-relieving compact drop, ever so gentle back sweep, and slight drop flare, its increasing radius drops offer multiple hand positions. Now updated with the ability for fully internal cable routing, the new WCS Streem ups its advantages to fortify its position as the perfect choice for road racers and serious enthusiasts who demand performance without sacrificing comfort in the everlasting quest for great ride experiences. - Internal cable routing - Compatible with Shimano EW-RS910 junction box - Increasing radius drops - Material: triple-butted 6066 alloy - Bend style: compact - Top style: ergonomic - Drop: 128mm - Reach: 73mm - Drop flare: 2° - Back sweep: 5° - Clamp diameter: 31.8mm - Accessory mount diameter: 31.8mm - Compatible with Shimano EW-RS910 junction box - Cable routing: full or partial internal - Clip-On compatibility: yes for all sizes except 380mm - Other features: Di2 cable internal routing—C260 compatible - Weight: 287g (42cm)

With a lifetime of experience of riding and winning on trails and racecourses around the world, the Ritchey tradition of designing ideal handlebars continues with the introduction of the WCS 10D Rizer. Taking inspiration from the original XC 10D flat bar, this 800mm-wide trail bar offers a generous 10° backsweep for perfect wrist alignment, 4° upsweep to reduce pressure on the outside of the hand, and 20mm rise for optimum positioning. All of this combines to deliver a uniquely comfortable and controllable mountain bike experience. Whether ripping your favorite trails from Moab to Houffalize or your local runs, the Ritchey WCS 10D Rizer bar will help deliver a lifetime of great mountain bike experiences. - Material: triple-butted 7050 alloy - Width: 800mm - Rise: 20mm - Backsweep: 10° - Upsweep: 4° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 350g

The new 2X Trail bar is two bars in one: select 5mm of rise or drop while maintaining a 9-degree sweep. Great for 29ers and other bikes with tall front ends. - Material: triple-butted 7050 alloy - Width: 720 and 760mm - Rise: reversible +/- 5mm flat rise - Backsweep: 9° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 232g

Same proven Ritchey quality, performance, and materials now beefed up and available in trail-worthy widths. A shallow rise and gentle sweep are the key attributes of the WCS Trail Rizer bar. The extra-wide grip area allows plenty of room for all components and remotes of choice. - Material: triple-butted 7050 alloy - Width: 800mm - Rise: 20 or 30mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 284g

WCS VentureMax Drop Handlebar - Evo sweep of 6 degrees - 24 degrees of flare - Ergo Bio-bend - Compatible with all hood types

WCS VentureMax Drop Handlebar - Evo sweep of 6 degrees - 24 degrees of flare - Ergo Bio-bend - Compatible with all hood types

Ritchey WCS VentureMax XL 52cm wide appeals to bikepackers with a 24-degree drop flare and comfortable reach/drop.. - Broad 52cm width offers plenty of space for mounting accessories and bags - The flattened 38x22.5mm top section provides a comfortable area for resting hands - Width is measured at the initial bend rather than at the hood

- Integrated front extension provides additional hand positions - Designed and intended for all types of drop bar riding - Traditional drop bar shape with no flair to the drops - Lightweight 6061-T6 alloy construction - 439g (42cm)

- Provides extra hand positions for gravel, touring and adventure riding - Bar top features an ergo profile for comfort\n- Moderate 25 degree flare angle - Lightweight 6061-T6 alloy construction - 480g (42cm)

- Features an integrated aero bar that provides additional hand positions - Allows the rider to safely achieve an aero tuck position during long days in the saddle - Can be used with the armrest kit for added comfort (RI2030) - Aluminum construction with 6 degrees of back sweep - 31.8mm bar clamp diameter, 423g

- Inspired by the classic V-Cross BMX bars from the 80's - Constructed from butted 4130 Cro-Mo - 820mm width, can be cut to 720mm if desired

- Constructed from a unique blend of 13 different thicknesses of 4130 CrMo tubing\n- Unique 31.8mm clamping area that is Farr stiffer than the typical 22.2mm clamping area of BMX handlebars \n- Compatible with most 31.8mm stems

- World Cup DH proven double butted 7075-T6 aluminum bar - Designed with Downhill as well as All Mountain and Enduro riding in mind - 790mm width provides confidence for even the toughest trails

- Initially designed and built for trials, it soon became apparent this handlebar can serve as a high-rise bar for almost any discipline - Due to its 76mm rise and pleasing 9-degree backsweep, this handlebar affords an upright position that is comfortable enough for leisure and daily commuters - High rise 7050-T6 aluminum bar

E-Element Riser Bar - 7050-T6 aluminum bar with special Element Butting Technology for E-Bike use - Lab tested by EFBE Pruftechnik in Germany, certified for safe use on E-Bikes under the toughest conditions - Includes cutting lines and stem alignment guide marks

Double butted 7075-T6 aluminum bar, designed and tested by Reverse Team Rider Lukas Knopf - Inscribed with his mantra - life is short - stunt it - Includes cutting lines and stem alignment guide marks

Double butted 7075-T6 aluminum bar, designed and tested by Freeride legend Nico Vink - Designed for riders who value strength and reliability over light weight - Increased wall thickness to withstand the toughest abuse

- Reverse Components flagship handlebar reduces vibrations which can cause fatigue on longer runs over rough terrain\n- Carbon construction with Seismic vibration damping technology\n- Unique carbon laminate process makes a handlebar that is both lightweight and strong \n- Tested extensively at the EFBE laboratory in Germany, a pioneer in DIN 79100 test methods

Lightweight 6061 aluminum handlebar with extra backsweep makes it possible for kids to change position more quickly, to steer the bike more actively and to support the child in an ergonomic posture on the bike - Designed around smaller shoulder width and arm span of young riders

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

The Renthal Fatbar Lite is the ultimate lightweight, trail-proof aluminum handlebar. Designed and developed to offer the ultimate combination of lightness, strength and durability. - The Fatbar Lite is the ideal handlebar for a wide range of disciplines, from trail riding, right through to XC and Enduro racing - Exclusive Series 7 aluminum is heat treated to provide strength and durability - Shot peened to increase fatigue life and durability - Hard anodized to keep your handlebar looking new