Filter By:
- Lubes/Cleaners (238)
- Tools (951)
- Workstands (57)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools/Maintenance
- Fast action bike cleaner
- Readily biodegradable ingredients
- Reduced carbon footprint with 94% less packaging
- 100% plastic free packaging, 100% water free, 100% environmentally friendly ingredients, including plant based raw materials
- Supplied in a compostable sachet and printed with vegetable inks
- FSC recycled card box
- Re-fill your old bottle and help reduce plastic waste
- Dissolves easily in any type of water. Cold, warm and hot. Hard or soft
- Safe to use all over the bike
- Alkaline based and free from alcohol, CFCs, (EDTA), solvents or acids
- Vegan & vegetarian friendly
- -01: 4 sachets, 30g each
- -02: Power Bundle: 4 sachets, 1x aluminum bottle, 1x bike clener spray trigger, 1x Silicon base for aluminum bottle
Precision CNC machined aluminum tool for the installation and removal of 16-notch external bearing bottom brackets. Featuring updated tooth profiles to optimize the fit between the tool and high performance BB parts. Anodized and laser engraved for easy identification and featuring a ratchet/torque wrench compatible 3/8-inch drive.
- 16-notch 39mm OD cups
- Fits: Shimano XTR BB93, Dura-Ace BB9000, Token
- Added depth to fit Shimano STEPS square drive motor
Also called a sleeping hub, the Dummy Hub slides into rear dropouts and replaces the rear wheel for chain cleaning and transport. The DH-1 works with all derailleur and 1/8" chain. The unique design allows the bike to be shifted and works with open dropout and thru-axle frames up to 12mm.
Take the guesswork out of installing cables, wires and housing inside the frame. The IR-1.2 speeds the internal frame routing of electric wires, shift cable/housing, brake cable/housing and hydraulic tubing on carbon fiber, titanium, and aluminum frames. Kit includes four plastic-coated 250cm cables with attached magnets and unique fittings plus an external guide magnet to speed operation. Newly updated to include a dedicated E-tube Di2 cable connector that easily pulls through a 6mm frame hole. Opposite polarity magnets on cables seek and attach inside frame tubes, making it easy to route through frame entrances and exits. Works with any size frame including tandems. A true time and frustration saver!
A daily-use, shop version of Park Tool's world-famous CM-5.2 Chain Scrubber. The CM-25 features a super-tough die-cast aluminum case and handle, plus a unique brush/sponge replacement cartridge that makes it easy to keep it running smoothly and working properly. Park Tool's proven four-sided scrubbing action makes thoroughly cleaning chains quick and easy. A shop quality cleaner built to give years of constant use.
- Proven chain scrubbing technology leaves chains sparkling clean
- Durable A380 aluminum die cast case and removable handle
- Dual-sided sponges and wicking pads to help reduce drips
- Rotating brushes clean on all four sides of every link
- Brush and sponge cartridge quickly and easily clicks in and out (RBS-25)
- Locking cover with stainless steel hinge pins
- Choose drip or immersion fluid application methods
- 100% serviceable
200 HOUR/1 YEAR SERVICE KIT (INCLUDES AIR CAN SEALS, PISTON SEAL, GLIDE RINGS, IFP SEALS, SEAL GREASE/OIL) - SUPER DELUXE THRUSHAFT C1 - TREK (2021)
High-quality L-key set out of stainless steel for hexagon socket screws by Wera. The Hex-Plus profile offers a greater contact surface in the head of the screw; the notching effect is therefore reduced to a minimum and damage to the screw head is more or less eliminated. Comes with hex ballpoint on the long arm: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving.
- Stainless steel prevents the transfer of extraneous rust: fasten stainless screws with stainless tools
- Hex-Plus allows socket head screws to live longer
- With Take-it-easy tool finder: color coding by size
- Wear-resistant clip material for enhanced durability
- Color-coded, easy-to-grip plastic sleeve, even at low temperatures
- Comes in an almost wear-free L-key clip fastener
High-quality L-keys for recessed TORX screws. Comes with a holding function: the wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screws on the tool at both ends. The BlackLaser surface treatment provides outstanding corrosion protection and a long service life. Available in a practical clip fastener, whose wear-free material provides secure storage for the L-keys and enables simple removal.
- Holding function for recessed TORX screws
- BlackLaser surface treatment for corrosion resistance
- "Take-it-easy" tool finder: color coding by size
- Color coded, easy-to-grip plastic sleeve, even at low temperatures
- Includes: 1x TX 8x76 mm, 1x TX 9x79 mm, 1x TX 10x85 mm, 1x TX 15x90 mm, 1x TX 20x96 mm, 1x TX 25x104 mm, 1x TX 27x112 mm, 1x TX 30x122 mm, 1x TX 40x132 mm
$0.86
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools.
• Made from hardened alloy tool steel
• Uses 7mm or 9/32" 12 pt box end/socket
• Sold singly or in pairs
$0.94
This is a single replacement pin for Park Tool HCW-4 and SPA-6 pin spanner wrenches.
$1.05 - $2.75
Bleed fittings specifically designed for Hayes hydraulic disc brakes.
$1.36
Precision brake bleeding tools and adaptor kits for Magura brake systems.
$1.95
Fits all 1/4-inch socket-type torque wrenches for use with the Prestacycle Bicycle Bit Set. Prestacycle's bits cost 1/10 the price of buying socket head sets to meet all the requirements of bicycles.
Using bits allows you to perform initial installation with Prestacycle's reversible mini ratchet – then leave the bit inside the job – remove the mini ratchet – and connect your torque wrench onto the bit to finish final tightening.
$2.50
Specially formulated low-friction lubricant for the seals and bushings of the air chamber for front and rear Fox Racing Shox. Float Fluid is the recommended lube for use with Fox forks and shocks.
- Use when rebuilding Fox suspension to lubricate foam rings and seals
- Corrosion inhibitor
$3.59 - $16.99
- Developed by the Boeing company for lubrication and protection of aircraft components
- Dries to a thin waxy film that clings to metal for months
- Law prohibits ORM-D materials from shipping by air
$3.73
High-quality bits for recessed Torx Plus screws. Torx Plus profile: in comparison to normal Torx profiles, the enlargement of the 6 torque-transferring flanks between the tool and the screw is effected by means of an ellipse-shaped profile design and not a circular one. This means that the power applied when screwdriving is spread over a larger area. Higher torque is transferred and the service life of the screw and tool is also enhanced.
- For Torx Plus screws
- Particularly hard for semi-hard materials
- 1/4" hexagon drive
- High torque transfer
- Size: 40 IP x 25mm
$3.95
Refill pack for the Park Tool TPT-1 Tubeless Plug Tire Tool and other similar tools. These vulcanized rubber plugs are used to temporarily repair punctures in tubeless bicycle tire systems. Set of 5.
NOTE: Intended for tubeless bicycle tires using sealant only. Not compatible with inner tube systems.
$3.95 - $8.55
High-quality Wera L-keys with color-coded, convenient plastic sleeve. The tool is quickly accessible and the ergonomic and pleasant handle is easy on the hands even at low temperatures. The Hex-Plus profile offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys.
- L-keys for hexagonal socket screws
- Hex-Plus allows socket head screws to live longer
- Color coded, easy-to-grip plastic sleeve, even at low temperatures
- Hexagonal ballpoint on the long arm
- Wear-resistant size marking
$3.99
Put these beauties in your tool kit for quickly fixing flats on the road.
- Light weight, low profile lever
- Durable composite construction
- Easy to get under the tire bead
- Set of three levers to assist with hard-to-remove tires
- Included cap keeps the set together
$3.99
- Microcell is ergonomically contoured for maximum comfort and surface area
$4.00
Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike..
- For disc caliper repair
- Fits SRAM Guide, Trail, and Avid Code Brakes
$4.00
Getting a flat is a pain in the butt. It's an even bigger pain in the butt if you don't have the stuff you need to get back home. These patches will help get you back to where you need to be.
- Six patches
- Sandpaper
- Instructions included
$4.00
Tools for repair and maintenance of RockShox Reverb suspension seatposts.
- Specific to RockShox Reverb post
$4.00
To adjust preload on Hollowtech II cranksets
$4.04 - $7.78
High-quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. "Take-it-easy" Tool Finder: color coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace.
- Hexagonal screwdriver hex-plus
- Multi-component Kraftform handle for fast and ergonomic screwdriving
- Take-it-easy tool finder: color coding according to profile and size
- Hex-plus allows socket head screws to live longer
- Hexagonal anti-roll feature against rolling away
$4.95
Get those heads sealing like new and reduce compressor energy waste with Park Tool's Head Seal Kit. This kit will help get rid of that hissing sound you've been hearing when it has been too long since servicing your Park Tool INF-1 or INF-2 shop inflator.
Kit includes:
- 1 #1586 Presta Seal
- 1 #1588 Schrader Seal
- 2 #1576-2 O-rings for Shuttle-valve
- 1 #1682-2 O-ring for INF-1 and INF-2 Head Adaptors
$4.95
• Updated with a new material and new design
• Features a wide flat tip for easy entry and fast tire removal, ergonomic shape and a handy spoke hook when multiple levers are needed
• Perfect for tight beads and tubeless tires
• Sold in sets of two.
$4.99
Lezyne's Power Tire Levers are winning the fight against stubborn tires. They're made of a high-strength composite material for excellent strength and durability. Their thin hook ends easily slip under tight beads, while the large handle gives you the leverage needed for tire removal. On the backside, there is a hook to attach the lever to a spoke for added versatility.
Page 1 of 42
Next page