Fenders

IMPACT-RESISTANT CLEANERS FOR THE BIKE Fender set made of robust sandwich construction A really brilliant performance! The SKS BLUEMELS BASIC mudguard set not only integrates perfectly on the bike, but also reliably protects against dirt and splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the fenders are extremely robust, rigid, and protected against corrosion. Stylish driving fun with a safety system With its glossy black surface and black fastening components, the BLUEMELS BASIC also leaves nothing to be desired in terms of looks. The ASR safety system ensures that the struts are decoupled if branches get caught between the spokes so that the wheel does not lock up. The V-struts with fixed bridges guarantee an individual adjustment, the bottom bracket cut-outs make assembly possible even in tight spaces. Includes accessories and struts. - Aluminum/plastic sandwich construction - V-struts with fixed bridges for flexible adjustment - ASR safety system - Bottom bracket cutouts - Made in Germany

Stay clean and dry with SKS's Velo42 Urban fenders! The rear snap-on fender attaches to seat tubes between 25 and 35mm in diameter to give you full coverage from road spray. These fenders fit tires up to 32mm wide.

You only need a couple of seconds to protect yourself and your bike from wet weather. Planet Bike's Clip-On Fenders are made of a durable all-weather polymer so never again will you come back from a ride with a dirt streak up your back. And, because they're clip-ons, you can easily remove the fenders when it's dry.

Compatible with: - Full bike fenders - 26" x 60mm - SpeedEz bike fenders - 26" x 60mm - Hardcore bike fenders - 26" x 60mm - Contains 60mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers

Planet Bike's Grunge Board is an easy-to-mount front fender that keeps you dry and clean when it's wet and muddy. It's made from a nearly indestructible polymer and it mounts in seconds to your down tube with the 2 rubber straps.

The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support. - Compatible only with disc brakes - Includes hook-and-loop fasteners and tension rubber - Weight: 580g - Max. outer diameter: 35mm - Wheel size: 27.5" (650B), 28" - Tire width: 52mm - Length, front fender: 680mm - Length, rear fender: 870mm

This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31cm / 12.2" (in length) - Weight: 47g / 1.66oz (FS, on fork)

This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31.7cm / 12.5" (in length) - Weight: 42g / 1.48oz

Easy to install and available in various colors and designs, the Splash Pad Front Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and compatible with suspension forks. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.

Mudrocker Front Fender for MTB is your perfect trail companion. Provides excellent mud and splash coverage on 27.5, 650b or 29er wheels with a maximum tire width of 3.0" Attaches to fork legs with hook and loop straps. Hook and loop strap fasteners or cable ties can be used to mount the Mudrocker to the fork bridge. If the fork bridge is perforated, the Mudrocker can be securely mounted with the included adapter. Fender can be adapted with scissors if necessary depending on the fork bridge. Perfect companion with the Mudrocker Rear Fender. - Measurements: 490mm - Weight: 112 grams - Compatiblity Notes: Compatible with disc brakes. Not compatible with V-brakes. - Made in Germany

These fenders feature an art-deco, zeppelin profile and are available in high polished silver and smooth Noir. They're 52mm wide for 650b wheels with tires up to 44mm wide. They are 52mm wide for 700c and 27" wheels, and work with tires up to 42mm wide. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed - eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build. Read the instructions to make sure your frame and fork has the correct mounts and hardware needed.

SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.

Simple solution to keep the spray down when the weather turns nasty - Attach to the fork crown and legs with zip ties - Compatibility: universal - Width: 120mm - Color: black - Weight: 20g

The X-Guard is a universal downtube fender for any wheel size. It is attached using two straps on the lower bar (downtube), making it compatible with fat bikes and bicycles with oversized tires for all-around mud protection. It also protects E-MTB batteries from dirt, splashes and flying rocks. The straps are extra long and can be shortened as needed, making X-Guard suitable for any frame shape and all common battery models.

Keep water and mud off you with SKS's Shockboard front fender! It's super light and nearly unbreakable so you know it's ready for off-road action. Plus, it works with most rigid and suspension forks as well as disc and linear-pull brakes.

- Smart clip-on front mudguard for road, cyclocross, hybrid, gravel bikes, etc. - Fits a maximum tyre width up to 38mm. - It is the ideal companion to our S-BLADE rear mudguard. - Its smart, double hinged quick release fitting system also fits aero forks. - Paintwork protection film for the frame is included.

This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 57.5cm / 22.6" (in length) - Weight: 75g / 2.65

This sea gem shines on just about any color bike. - Comes with black hook and loop velcro for easy installation and removal. Instructions for installation can be found here. - Keeps your face clean and keeps you smiling longer. - Added wing protection keeps dirt/mud/dust/grime out of your fork seals and stanchions, increasing time between suspension services and extending the life of your fork. - Fits most mountain bike wheel size and fork combinations. Not compatible with reverse arch forks. - Flexible, lightweight and extremely durable polyethylene that's made in the USA from energy-conscious manufacturers using sustainable materials.

This one's for the screwups and daydreamers and all the fringe in between. The Space Cadet combines two of our favs - galaxy and camo - for our flightiest design yet! - Comes with black hook and loop velcro for easy installation and removal. - Keeps your face clean and keeps you smiling longer. - Added wing protection keeps dirt/mud/dust/grime out of your fork seals and stanchions, increasing time between suspension services and extending the life of your fork. - Fits most mountain bike wheel size and fork combinations. Not compatible with reverse arch forks. - Flexible, lightweight and extremely durable polyethylene that's made in the USA from energy-conscious manufacturers using sustainable materials.

The Grunge Rear seat post mounted fender is designed with an 85mm wide profile to shield your rear end from spray, mud and crud. It'll keep you clean on your commute or when ripping around on singletrack. - Durable all-weather polypropylene blade - Quick release seatpost mount attaches and removes in a snap - Features fender angle adjustability to fit most bikes and dial in spray protection - Eyelets Required?: No - Wheel size: 24", 26", 650b, 29" and 700c - Fender width: 85mm wide x 460mm long - Max tire width: 2.25" - Weight: 174 grams

Turn your bike into an all-weather vehicle with Planet Bike's Cascadia Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use. - Length: 445mm (7.5") - Weight: 160g (5.6oz)

The X-Board is an innovative clip-on fender with rubber fasteners for downtube mounting. - Adjustable soft rubber cable-spacers, ideal to adapt on almost any tube profile - Robust rubber fasteners - Dual compound-softspoiler

This super-lightweight (45g) and discreet mudguard protects your face (and your fork seals) from mud and water. Made of super-soft material, it fits 26", 27.5", and 29" bikes and is compatible with most forks. Thanks to the included zip ties that wrap around the fork bridge and fork legs, the Flapguard sticks close to your bike even during extremely aggressive riding. - Also compatible on rear side of frame

These clip-on fenders are designed specifically for fat bikes. They're extra-long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle

S-BOARD This smart clip-on front mudguard is for road, cyclocross, hybrid, gravel bikes, etc. Suited for maximum tire width up to 38mm, it is the ideal companion to our S-BLADE rear mudguard. Its smart, double-hinged, quick-release fitting system also fits aero forks. Paintwork protection film for the frame is included. S-BLADE The S-BLADE is the little brother of our top-selling X-TRA-DRY for the ambitious racing cyclist. With our quick-release mounting, the S-BLADE can be fitted on virtually any racing bike, and the angle setting can be optimally adjusted. - Weight: 206g - Wheel size: 650B – 28-inch - Tire width: 30 – 38mm - Length front fender: 390mm - Length rear fender: 465mm

Keep water and mud at bay with SKS's Dashblade fender! It's light and easy to install and remove thanks to its quick-release strap that fits a wide variety of seatposts and seat tubes.

If you ride bent, Planet Bike's recumbent fenders keep you covered when Mother Nature rains on your ride. They are designed for non-tradtional bike and trike setups. Their clean lines and rugged aluminum construction provide great protection from rain, road grit, and other tire spray. - 6061 aluminum blades - Stainless steel V-stays and hardware are pre-installed and disc brake compatible - 100mm mudflaps for extended coverage - Release Tabs on front fender for added safety - Eyelets Required?: Yes - Wheel size: 20” - Max tire size: 20" x 1.5" (50mm) / 20" x 1.9" (60mm)

The Velo 65 Mountain 29 is an ideal front and rear fender retro fit kit for 29" mountain bikes. Its practical universal mount makes it easy to securely attach to a wide range of bikes. The included U-stay kit provides fender stability. Suitable for tire widths up to 2.35". - Features a safety release on the stay mount

- Contains 2 Mudflaps and Quick-Snap Attachments - Compatible with all hybrid (45mm) fenders (part#s 7004, 7006, 7013, 7015) (sold separately) - For use with 45mm width fenders (sold separately)