- 100% SDG DNA in the design of these pedals - Utilizes a flat profile which allows optimal grip for flat pedal shoes - Composite body design - Minimal 17mm pedal body height maximizes the pedal feel - 105mm x 110mm Platform - Ramped and undercut traction pad - 18 pins, replaceable, bottom loaded - Bearing/bushing design for maximum durability. Fully rebuildable pedal design - Cro-Mo axle
- Follows the evolution of modern trail bikes and all-mountain rigs, providing you a more sure-footed, durable pedal to match your single-track endeavors. - Thin and lightweight - Bottom loaded hex-head threaded pins (20x/pedal) - Body: 15.5mm thick - Platform: 110mm x 115mm - Chromoly steel axle - Bearing/bushing - Internals are fully serviceable and replaceable - 440g
Low And Lean Made from super-strong 6061-T1 aluminum, the double concave body is sleek and light while still giving your foot a nice wide platform to stand on. Round And Round We Go Fully sealed 4-bearing design makes for smooth rolling rotations over an extremely long life. And the ability to rebuild makes it nearly unkillable. Ride Don't Slide Pins at the front and back of the pedal are angled slightly to provide improved traction and foot comfort. Because pedal bites suck. Look Good Ride Good Our top of the line pedals come in 6 different colors so that you can add as much flavor and flair to your ride as you like. Pedal Envy More than just a trusty platform for stomping landings and railing around berms, the Atlas Pedal has long been Race Face's top contender. It's strong, thin, concave, lightweight, rebuildable, and ideally suited for getting wild in the woods. Specs: - Axle Material: Chromoly Steel - Body Material: 6061 Aluminum - Material: 6061 Aluminum - Platform Height (MM):14.5 - # of Pins: 20 SHCS hex traction pins per pedal (10 per side) - Platform L x W (MM): 114 x 101 - Weight: 355g
$49.99 - $59.99
Here For The Party A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing. The Full Meal Deal A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side. Not Just Another Axle Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up. Bling For Your Bike No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from. Specs - Platform Height: 18.4mm - # of Pins: 16 SHCS hex traction pins per pedal (8 per side) - Platform L x W: 101 x 110mm - Axle Material: Chromoly Steel - Body Material: Nylon Composite - Material: Nylon Composite - Weight: 360g
The GEO TREKKING GRIP pedals are ideal for commuting. Featuring a one-sided SPD-compatible mechanism, with a flat surface elastomer grip on the other, safe for riding in any conditions. - Technology: Hybrid pedals = half flat + half clipless - Cleats: X-Track Easy - Cleats Standard: SPD compatible - Release angle: 13° - Retention: 5-10 - Body: Composite / Elastomer bi-injection - Traction: Elastomer bi-injection - Spindle: Chromoly+ - Platform width: 86mm - Weight (pedal): 228g - Weight (pair + cleats): 511g
The KEO 2 MAX pedal is an excellent example of LOOK's design experience. With its wide contact area and composite body, it offers state-of-the-art technology for full power transfer, in an affordable package. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Composite - Spindle: Chromoly+ - Platform material: Stainless Steel - Platform area: 500mm² - Platform width: 50mm - Q Factor: 53mm - Stack height + cleats: 17.3mm (11 + 6.3mm) - Weight (pedal): 130g - Weight (pair + cleats): 328g
The MADE by LOOK KEO standard is recognized in the cycling world for its minimal weight and compact design of the cleat and pedal combo. Of course, compatible with all pedals on the market, their memory positioner is a major advantage when changing your cleats. Their principle and use are the same as the DELTA cleat standard; engagement and disengagement remain efficient and reassuring. - Use: Road - Material: Polyamide + PTFE - Lateral adjustment: 4mm - Longitudinal adjustment: 12mm - Weight (pair + fasteners): 68g
The X-TRACK is LOOK's entry level off-road pedal, but does not mean technology is left aside. The aluminum body and Chromoly+, double-sealed axles are robust and ensure total fluidity thru the pedal stroke. Tension can be quickly and easily adjusted from 6 thru 14. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Aluminum - Spindle: Chromoly+ - Platform area: 350mm² - Platform width: 57mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 200g - Weight (pair + cleats): 450g - Float angle: 6° - Release angle: 13°
The X-TRACK EN-RAGE is a sturdy pedal to accompany you on your favorite trail ride with varying terrain. The forged aluminum body is designed to resist extreme conditions and potential abuse from trail riding. The large contact area is perfect for riders looking for a comfortable width that offers security but also a surface contact-to-weight ratio which remains best in class for trail pedals. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Aluminum - Spindle: Chromoly+ - Platform area: 545mm² - Platform width: 63mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 210g - Weight (pair + cleats): 470g - Float angle: 6° - Release angle: 13°
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Anti-slip walk pads - Fixed position with no float
TMAC Signature Tyler McCaul Pedal. With over two years of development features one of the most concave designs on the market. Not only does the TMAC pedal give precise control, the non-offset design provides more contact with the pedal with equal weight distribution in front and back of the pedal spindle. This non-offset design feels like the largest pedal ever made at a mere 110mm x 105mm footprint.
$163.30 - $164.00
This set of pedals aims to provide a large platform, thin profile, durability, tune-ability and serviceability. Ideal for anything from all-mountain, to downhill, to snow. - 105x115mm pedal body - 17mm concave foot bed - Extruded 6061 aluminum body and 4140 chromoly steel axles - High-load DU bushing and cartridge bearing - 11 pins per side and 7 of which can be flipped to fit short- or long-way to fine tune the amount of grip desired - 9/16"
Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. - Spindle material: Forged scm 435 chromoly steel - Body material: One piece composite - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 294g per pair - Warranty: 5 years
$89.99 - $99.99
Crank Brothers' most versatile pedal. The Candy excels at it all—cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. Specs: - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 355g per pair - Warranty: 5 years
Choose to ride flat or clipped in for city commutes and casual rides around town. This hybrid composite pedal with its 2-sided entry allows you to do both. It features premium bearings and a double seal system, diamond plate pads for traction, and molded pins and ribs for grip. - Premium brass cleats with shims included - Q-factor: 57mm - Release angle: 15° / 20° - Forged 435 Chromoly steel spindle - 300 series stainless steel spring - 5-year warranty - 331g per pair
Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals
Crank Brothers Mallet DH, the choice of DH world champions. - Concave platform for secure foothold - 8 adjustable pins per side for grip - Traction pad technology customizable interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float and release angle - Premium bearings and double seal system - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material cast: Stainless steel - Spring material 300 series stainless steel - Release angle 15° / 20° - Max rider weight no restriction - Q-factor 57mm - Inner bearing type IGUS LL-glide bearing - Outer bearing type enduro cartridge bearing - Cleat premium brass cleats with shims included - Adjustable pins 8 per side for grip - Endcap hex alloy - Weight: 479 grams
For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: -Enduro catridge bearings - Igus LL-glide bearings - Double seal system (internal and external seals) - Hex alloy end caps - O-rings - Nuts - Sleeve bushings - Bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s
A revolution in performance and reliability. The kit includes premium internal components: - Enduro catridge bearings - Enduro sealed needle bearing - Double seal system (internal and external seals) - Hex alloy end caps - O-rings, nuts - Sleeve bushings - Bearing removal tool
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs
Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals. - Chromoly spindles - Sealed cartridge bearing and bushing in an alloy cartridge - Compatible only with iSSi Road pedals - Installs with iSSi Road spindle tool (TL5499) - Pedal Spindle: 9/16" - Spindle Material: Chromoly Steel
Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options. Includes: - iSSi chromoly spindles - Sealed cartridge outer bearings - Inner Bushings - Spindle nuts - Seals - iSSi-branded end caps
- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit. - Includes 36 steel pins and 2mm spacers to replace both sides of two pedals - The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.
e*thirteen's Plus pedal features a lightweight aluminum pedal body and 22 traction pins. - Lightweight aluminum pedal body - 22 traction pins - 9/16"
e*thirteen's Base pedal features a durable composite pedal body and 22 traction pins. - Durable composite pedal body - 22 traction pins - 9/16"
Xpedo XPR cleat set for R-FORCE 6 is an SPD style cleat specifically designed for 3-hole road shoes. - Weight: 135g per set with hardware - Float: 6°
The Baldwin offers the best of both worlds, bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. - Weight: 332g CrMo - Body: 60661 CNC AL - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Cleat: XPEDO XPT (6° Float)
The Baldwin offers the best of both worlds bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. - Weight: 292g Ti - Body: 60661 CNC AL - Spindle: Titanium - Bearings: 3 Cartridge - Springs: SWP - Cleat: XPEDO XPT (6° Float) *Titanium spindles have 180lbs weight limit.
Page 1 of 11 Next page