Filter By:
- Rigid (79)
- Suspension (114)
- Show More Brands
- Show Fewer Brands
Forks

$540.00
Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Fat Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough terrain, so you experience an astoundingly plush ride with precise handling. They've accomplished this by using a delightfully stiff and compliant UD carbon fiber construction, a tapered steerer, and a 15 x 150mm thru-axle. It all results in an enhanced riding experience and adds up to performance that you can count on.
- Post style brake mount
- DT RWS Axle included
- UD full carbon construction
- Axle to Crown Length: 480mm
- Brake Mount: Post Mount 160mm
- Crown Race: 40
- Front Axle: 15 x 150mm
- Material: Carbon
- Offset: 51mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: 1-1/8 – 1-1/2-inch tapered
- Weight: 750 grams
- Wheel Size: 26-inch

$565.00
The Whisky No.9 MCX “monster cross” fork brings extra-wide tires to your drop-bar bike. How wide? The MCX accommodates tires up to 700c x 51mm or 650b x 61mm (that’s 2.4-inches). A relatively short 415mm axle-to-crown minimizes the geometry effects of a larger fork, and a 51mm offset improves toe clearance with large tires or fenders. The design draws from our CX forks, with lightweight carbon construction, a 12mm thru axle, and flat-mount brakes. Three-Pack mounts, dynamo cable routing, and fender mounts (700c x 45mm tire clearance with fender) add versatility for bikepackers and gravel riders.
- 12 x 100mm thru-axle
- Designed for flat mount disc brakes
- Hidden, removable fender mounts
- 700c x 51mm or 650b x 61 mm max tire size
- ASTM Condition 2 - For off-road riding and jumps less than 12-inches
- Includes thru axle and Whisky Parts Co. compression plug

$125.00 - $130.00
The Ogre fork is non-suspension corrected and will run 29-inch as well as 27.5-inch tire options. Made of 4130 CroMoly, it's got 51mm IS disc mounts, removable cantilever pivots, brake-line guides, low-blade threaded barrel bosses and mid-blade eyelets for a rack. This fork is designed to run disc brakes, fenders and a rack simultaneously. It's got two sets of triple bottle mounts, one on each leg.
- Axle to Crown Length: 447 mm
- Brake Mount: Canti studs, IS Disc Brake 160
- Crown Race: 30
- Front Axle: 9mm x 100mm
- Material: Chromoly Steel
- Offset: 43 mm
- Steerer Type: Straight 1-1/8-inch
- Wheel Size: 29-inch, 27.5+
- Powdercoat finish

$742.00
The iconic RockShox chassis got the fat treatment by reengineering it to meet the unique needs of fat tires and wheels. Everything from crown, to arch, to axle has been optimized to tackle the increased torsional loads of its wide stance. With more traction and control than ever before, you'll never be happier you went fat.
- Rebound
- Low speed compression
- 3-position compression (Open/Platform/Lock) damper adjustment
- Solo Air lets you add air to your forks through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously
- Fast Black coating on the upper tubes provides improved durability and decreased friction
- Rapid Recovery allows the fork to recovery faster between consecutive bumps, letting the wheel track the ground with greater precision
- Sag Gradients are printed right on the fork's upper tubes, making perfect suspension setup easy and accurate
- Air Guides - starting pressures noted on the back of the fork help you set up your suspension in seconds instead of minutes

$1,107.00
- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible.
- ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control.
- Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk".
- DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height
- Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible
- Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature.
- RockShox premium short fender included

$790.00
- 35mm chassis at home on the trail - stiff, playful, and light, really light
- Charger RC damper featuring Low Speed Compression adjust
- DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
- RockShox premium short fender included
- Maxima Plush damping fluid reduces friction and silences damper noise

$1,159.00
- 38mm chassis for increased stiffness and rider confidence
- ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control.
- Charger 3 features a completely new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk".
- DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume, and higher overall ride height.
- Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible
- Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature
- Includes premium short fender

$729.00
The all-new Bomber DJ is back in the mix with a whole new bag of tricks. Sharing the same 36mm chassis as its big brother, the Z1, the DJ comes in a dedicated 26" wheel configuration. Featuring a 20x110mm axle, the DJ is designed for maximum stiffness and offers seamless compatibility with existing DJ and DH front hub spacing standard.
- Dedicated 26" wheel configuration delivers shortest possible crown height for flickable front end
- Legendary Bomber durability with 36mm stanchions
- Buttery and easy-to-use GRIP damper
- Tapered steerer tube for maximum stiffness
- Adapters available for 15 x 100mm axle
- 1.5 Tapered steerer
- Offset: 37mm

$1,039.00
34 Factory is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time.
- Genuine Kashima Coating on upper tubes
- FLOAT EVOL air spring

$869.00
Designed for trail riding, the Factory Performance Elite 34 features a FIT4 damper, FLOAT EVOL air spring, and lightweight chassis. The 34 provides proven trail performance that instills confidence and control.
- Black anodized upper tubes
- FIT4 damper and FLOAT EVOL air spring
- Performance Series black-on-black graphics package

$1,069.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment

$1,049.00
Own the mountain with the award-winning 36 Performance, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Black anodized upper tubes
- FIT damper and EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment

$1,149.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
- Updated Crown Design saves up to 20 grams, and offers significant structural improvements

$1,249.00
FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability.
- The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs
- Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality
- The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release
- Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping
- Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button
- The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding

$1,249.00
The hard hitting, long-travel enduro specialist. When you need to go really big, reach for the 38. Optimized for 160-180mm of travel and packing the same revolutionary feature set as the 36, the 38 redefines what you think a long-travel single-crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time.
"Factory" says it all—feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat.
Built on 38mm, ultra-durable Kashima-coated stanchion tubes, it features a floating axle, new arch design, and lower leg bleeders to release built-up pressure.
- Genuine Kashima Coating on upper tubes
- GRIP2 damper with Variable Valve Control
- Next generation FLOAT EVOL with larger negative air chamber increases small bump sensitivity
- Floating axle design
- Lower leg bleeders
- Direct mud guard mount
- 27.5-inch: 723mm peak tire diameter

$1,049.99
The versatility of the Cane Creek HELM continues with the new HELM DJ.
The new Cane Creek HELM DJ combines the proven performance, reliability and strength of the HELM MKII's chassis with a new short travel air spring optimized for Dirt Jumps, Dual Slalom and Street riding.
Preset at 90mm travel and a 483mm axle to crown to accommodate a 26" wheel without changing the geometry of your dirt jump bicycle.

$425.00
The No.7 road fork features full unidirectional carbon construction, available in tapered or straight steerer tubes.
- Full unidirectional carbon construction
- Mid-Reach Caliper rim brake compatible
- 35c max recommended tire size
- ASTM Condition 2 - For off-road riding and jumps less than 12"
- No rider weight limit
- 5 year Whisky warranty
- Accommodates road plus tires
- Fender mounts
$525.00
The No.9 CX Flat Mount fork is a light-weight, forward-compatible front-end upgrade, ideal for cyclocross, gravel, or commuting. Featuring the flat mount disc brake standard, easy fender mounts and 12mm thru-axle dropouts to create a refined, clean design that trims considerable weight over previous versions. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for.
- 12mm thru-axle, 100mm spacing
- Designed for flat mount disc brakes
- Hidden, removable fender mounts
- 42mm max recommended tire size
- ASTM Condition 2 - For off-road riding and jumps less than 12-inches
- Includes thru-axle and Whisky Parts Co. compression plug

$425.00
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.7 Carbon Cantilever Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using the proven technology of a delightfully stiff and compliant UD carbon fiber construction. It all results in an enhanced riding experience and adds up to performance that you can count on.
- Cantilever brakes with 22mm posts
- 51mm clearance between fork blades
- Includes compression plug
- Axle to Crown Length: 392.2 mm
- Brake Mount (Fork): Canti Studs
- Crown Race: 30
- Front Axle: 10mm x 100mm
- Material: Carbon
- Maximum Tire Clearance (Fork): 48mm
- Offset: 45 mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Tube Length (mm): 300 mm
- Steerer Type: Straight
- Wheel Size: 700c

$435.00
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.7 Carbon Disc Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using proven technologies like a delightfully stiff and compliant UD carbon fiber construction, not to mention the use of disc brake mounts on their CX forks. It all results in an enhanced riding experience and adds up to performance that you can count on.
- Axle to Crown Length: 392.2mm
- Brake Mount (Fork): Post Mount 140mm
- Front Axle: 10mm x 100mm
- Material: Carbon
- Maximum Tire Clearance (Fork): 48
- Offset: 47mm
- Rotor Size (Fork): 160mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Tube Length (mm): 300mm
- Wheel Size: 700c

$425.00
The Whisky No.7 RD thru-axle fork is a thoroughly modern road fork for road bikes with tapered steerer tubes. It features a 12mm thru-axle for precise handling, clearance for high-volume road tires, and clean internal cable routing. Flat mount brake capability offers clean caliper fitment and backwards compatality with post mount brakes using adaptors.
- 100 x 12mm thru-axle
- 1-1/8 – 1.5" tapered steerer
- 45mm offset

$350.00
The Whisky No.7 RD fork is a modern caliper road fork for road bikes with tapered steertubes. Their No.7 RD fork features a standard 9mm x 100mm QR axle. It offers low weight, precise handling, and clearance for 28c tires. This is a perfect upgrade fork for in lieu of a steel or alloy fork, and makes a great replacement fork for existing carbon product.

$375.00
The No.7 Road fork is a thoroughly modern design, compatible with road bikes that utilize tapered steerer tubes. Features include 9mm x 100mm QR dropouts and brake mount for short-reach caliper rim brakes, to easily accommodate standard road wheels. The fork offers low weight, precise handling and tire clearance for up to 700 x 28c tires.
- 9mm x 100mm spacing
- For use with short reach caliper rim brakes
- 700 x 28c max recommended tire size
- ASTM Condition 1 - For use on paved surfaces
- Includes Whisky Parts Co. compression plug
- Axle to Crown Length: 367 mm
- Brake Mount (Fork): Short Reach Caliper (39mm - 49mm)
- Color: Black
- Crown Race: 30
- Defined Color: Black
- Front Axle: 9mm x 100mm
- Material: Carbon
- Offset: 43 mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: Straight
- Steerer Tube Length (mm): 300 mm
- Weight: 370 g
- Wheel Size: 700c , 650b
- Maximum Tire Clearance (Fork): 30c

$525.00
The Whisky No.9 CX Flat Mount fork is a lightweight, forward-compatible front-end upgrade, ideal for cyclocross, singletrack, gravel, or commuting. Redesigned, thoroughly tested, and dialed in for rough, off-road riding, it features the flat-mount disc brake standard, easy fender mounts, 12mm thru-axle dropouts, and internal brake routing for a refined, clean design. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for.
- 12mm thru-axle, 100mm spacing
- Designed for flat-mount disc brakes
- Fender eyelets on outside of fork leg for easy mounting
- 700c x 42mm or 650B x 50mm max recommended tire size
- ASTM Condition 3 – For rough off-road riding and jumps less than 24-inches
- Includes thru-axle and Whisky Parts Co. compression plug

$565.00
Sleek and serviceable, the Whisky No.9 CXLR Fork is a tough, lightweight upgrade for gravel riders and bikepackers looking to carry a little cargo up front. Sporting 3-pack mounts, mid-blade mounts for low-rider rack compatibility, and fender eyelets on the outside of the fork legs for easy mounting, the CXLR keeps everything clean and tidy with internal routing for brakes and dynamo hubs. Additional features like flat-mount brakes, 12mm thru-axles, and ample tire clearance make this standout piece perfect for your packing setup.
- 12mm thru-axle, 100mm spacing
- 700c x 42mm or 650b x 50mm max recommended tire size
- ASTM Condition 3 – For rough off-road riding and jumps less than 24
- Includes thru-axle and Whisky Parts Co. compression plug
- Brake Mount: Flat Mount 140
- Material: Carbon
- Weight: 526g
- Steerer Type: Tapered
- Offset/Rake: 45
- Steerer Tube Length: 350mm
- Axle to Crown Length: 395mm
- S.H.I.S. Crown Race Diameter: 40
- S.H.I.S. Stem Clamp Diameter: 28.6
- Fork Minimum Rotor Size: 140
- Fork Maximum Rotor Size: 160

$525.00
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on.
- Custom DT RWS Skewer included
- 3.0" max recommended tire size
- Axle to Crown Length: 480mm
- Brake Mount: IS Disc Brake 160mm
- Crown Race: 40
- Defined Color: Black
- Front Axle: 15 x 100mm
- Offset: 51mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: Tapered
- Weight: 750 grams
- Wheel Size: 29-inch

$525.00
A thoughtful complement to the Whisky No. 9 MTN Boost LT Fork, this short-travel offering is just the piece for transforming hardtail racers into fully rigid cross-country champs. Lightweight carbon construction, a tapered steerer, and thru-axle dropouts promise dependable strength and steering.
- Lighter and stiffer than a suspension fork, the MTN Boost ST Fork is long enough to replace forks with 110–120mm of travel
- 485mm axle to crown
- Boost 110mm spacing with clearance for 29 x 3.0” or 27.5 x 3.0” tires
- Room for up to 180mm rotor
- Whisky No.9 Thru Bolt and compression plug included
$565.00
For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more.
- 15mm thru-axle with 110mm Boost spacing
- Post-style brake mount
- 1.5" tapered carbon steerer
- Two sets of Three-Pack mounts
- ASTM Condition 3 - For rough off-road riding and jumps less than 24"

$525.00
Whisky's No.9 RD+ is an all-road fork designed for versatility with abundant tire clearance, up to 700x38c or 650x47c. Hidden and removable fender mounts make this fork all season capable.
- 12mm Thru Axle
- Flat Mount Disc Brake
- Tapered Steerer Tube
- 700x38c/650x47c clearance

$525.00
The Whisky No.9 RD thru-axle fork is designed from the ground up to offer a modern road fork experience. Big tire clearance, flat mount brake capability, and internal cable routing all add up to a clean look and capable performance. Featuring sleek hidden fender mounts, this fork carries through with Whisky’s promise of refined, versatile performance.
- 1-1/4-inch Tapered steerer tube
- 12mm thru-axle, 100mm spacing
- Designed for flat mount disc brakes
- Hidden, removable fender mounts
- 700 x 30c max recommended tire size
- Includes thru axle and Whisky Parts Co. compression plug
Page 1 of 7
Next page