Skip to main content

Questions about a brand or parts? (724) 691-0966

Suspension Service

We are factory trained to work on your forks and rear shocks from all major brands. New seals, fresh fluid, or a custom damper tune, we can do it all. We aim to please, hit us up today for questions addressing your suspension set up or service. Advice and estimates are always free, don’t hesitate to stop by and say hello. Turn around time in a week or less for all in house work. We're also happy to work closely with your suspension manufacturer for custom tuning and damper services. 

All bicycles purchased at our shop include a complimentary sag set up and adjustment follow up. Didn't buy your bike here? No problem just stop by, sag set up is always free. We also offer custom tuning services including token installation and shim stacks. 

Contact Us

BASIC SUSPENSION SERVICES

We recommend you service both your front and rear shock simultaneously. Do this every 50-100 hours of ride time to keep your parts under warranty from major brands. Don't forget about your dropper post too!

For further information on what your specific suspension brand calls for service interval wise please don't hesitate to reach out. 

FORK SERVICEE

50-100 HOURS OF RIDE TIME

$75

Plus Seals

SERVICE DESCRIPTION

Remove fork lowers

Clean all internal and external surfaces

Inspect bushing surfaces

Inspect stanchions

Install wiper seals, foam rings

Install new oil 

Install new crush washers

Torque everything 

SHOCK SERVICE

50-100 HOURS OF RIDE TIME

$100

Plus Seals

SERVICE DESCRIPTION

Check and record air pressure, rebound settings, compression settings

Cycle and inspect functionality of shock and adjustment knobs

Thoroughly clean and inspect shock for wear and damage

Remove air can from shock

Clean and inspect all surfaces for damage and wear

Remove and replace all applicable seals and bumpers

Fill with new fluid or grease according to factory specifications and reassemble

Reset to customer's air pressure, rebound, and compression settings

Submerge shock in water to ensure there are no leaks

Cycle and inspect functionality of shock and adjustments

DROPPER SERVICE

100 HOURS OF RIDE TIME

$75

Plus Rebuild Kit

SERVICE DESCRIPTION

Inspect functionality of dropper post

Clean and inspect post for damage or wear 

Completely disassemble post

Clean and inspect internal components for damage or wear

Install new seals, glide rings, keys, wipers, and other components as applicable to brand

Fill with grease and/or oil according to factory specifications

Reassemble post, torquing applicable components to factory specifications

Cycle and inspect functionality of post and adjustments 


Advanced Suspension Services

Intended for shocks and forks with heavy use. Please reach out if you think it's time.

DAMPER BLEED

100-200 HOURS OF RIDE TIME

$100

Plus Seals

Only applicable to closed damper systems. Includes 50 hour service procedure plus a damper bleed.

Factory Tip: Do this every 100 hours of ride time, or as you deem necessary.

SERVICE DESCRIPTION:

  •  Lower Service (listed above) 

  • Remove damper from CSU

  • Clean and inspect all surfaces of damper body

  • Inspect functionality of damper adjustments

  • Drain existing fluid

  • Fill with factory recommended fluid and bleed

  • Inspect functionality of damper adjustments

  • Install damper back into CSU

DAMPER SERVICE

200+ HOURS OF RIDE TIME

$150

Plus Seals

This is a complete overhaul. The service includes lower service, air spring service, and a damper overhaul. 

Factory Tip: Every 200 hours of ride time to keep you running smooth.

SERVICE DESCRIPTION:

  • Lower Service (listed at top)

  • Air Spring Service (listed above)

  • Damper Overhaul :

    • Remove damper from CSU

    • Clean and inspect all surfaces of damper body

    • Inspect functionality of damper adjustments

    • Drain existing fluid

    • Completely disassemble damper

    • Install all new seals

    • Reassemble damper and torque applicable components to factory specifications

    • Fill with factory recommended fluid and bleed

    • Inspect functionality of damper adjustments

    • Install damper back into CSU

SHOCK OVERHAUL

200+ HOURS OF RIDE TIME

$150

Plus Seals


Recommended Service Interval:
Every 200 hours of ride time, or as necessary.

SERVICE DESCRIPTION:

  • Air can service (if applicable) plus the following…

  • Completely disassemble damper

  • Clean and inspect all surfaces for damage and wear

  • Install all new seals

  • Reassemble shock and torque applicable components to factory specifications

  • Fill with factory recommended fluid and bleed

  • Cycle and inspect functionality of shock and adjustments