29-Inch Wheel (29ers)

Blackthorn SLX is all-mountain with a side of adventure. The stiff and durable aluminum frame uses our progressive trail geometry for a ride feel that's equal parts downhill ripper and stable climber. The Split Pivot suspension design builds on those qualities with supple-to-supportive travel linked to a 140 mm RockShox Super Deluxe Select+ shock. Paired with a 160 mm RockShox Yari RC fork, Blackthorn has the chops for those rugged lines you've been eyeing. On-bike cargo features like the integrated down tube strap, top tube mounts, and a bottle mount let you keep the ride essentials on your bike rather than your back. Shimano's SLX componentry means a smooth-shifting 1 x 12 wide-range drivetrain, while the four-piston brakes offer all the stopping power you'll need. Blackthorn is a clever and capable rig that brings a lot to the all-mountain table. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Purpose-Tuned Suspension The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. Progressive Geometry Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS Carbon Main Triangle with Carbon Seatstays and Aluminum Chainstays EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. Top Tube Accessory Mounts Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. Down Tube Three-Pack Mounts Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. Integrated Repair Kit Location Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) Accommodates a 26 oz Bottle All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. Internal Sleeved Cable Routing Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. Molded Frame Protection Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. Chain Guide-Compatible Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). Stealth Dropper Post Routing Compatible with 30.9mm dropper posts for true trail bike performance. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.

Cassidy SLX is built for more than just getting downhill the fastest. Sure, the 6061-T6 aluminum frame is up for all the trail punishment you can put it through. And the RockShox Super Deluxe Select+ shock and ZEB R fork have your back with 165 mm rear and 180 mm of suspension travel on tap. Cassidy's geometry and our Split Pivot suspension design ensure your tires stick to the trail, whether you're hurtling downhill or climbing back up for another lap. Unlike other enduro bikes, Cassidy features on-bike storage, such as a tube strap spot, a top tube mount, and full-size bottle mount. This lets you extend your ride time or just get the sweaty pack off your back. With a Shimano SLX 1 x 12 drivetrain and four-piston brakes, you're equipped for any enduro course or trail day. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.

Blackthorn C SLX stands out in the carbon all-mountain bike field for its capability and value. The progressive geometry feels planted on descents and steep climbs. A 160 mm Fox Float X Performance fork and 140 mm RockShox Lyrik Select+ RC shock with Split Pivot suspension design grants you the poise to plow through rock gardens, send drops, and hit doubles with confidence. Blackthorn brings you the benefits of pack-free riding, thanks to the integrated down tube strap, top tube mounts, and a bottle mount. Shimano's SLX 1 x 12 drivetrain and four-piston brakes are components you can rely on. We designed Blackthorn C SLX from the dirt up to lead the all-mountain category. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.

Cassidy C SLX gives you confidence in your lines. The carbon frame tracks straight through rock gardens and over obstacles, supported by RockShox's Super Deluxe Select+ shock and ZEB Select+ RC fork—good for 165 mm rear and 180 mm front travel. The geometry is long, low, and slack enough to tame the steepest descents, but still lets you earn your turns on the climb back up. Our Split Pivot suspension design is compliant and efficient, promising predictable braking and excellent traction. On-bike cargo features include a padded tube strap spot, top tube mount, and full-size bottle clearance for longer rides and less weight in your pack (if you need one at all). The Shimano SLX 1 x 12 groupset is renowned for its reliable performance. Ready to rip? KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.

Spearfish C SLX is a carbon XC 29er that hits a sweet spot between race-day performance and weekday fun. The carbon frame keeps things light and stiff, while the progressive XC geometry makes descending a blast and climbing a breeze. The Fox Float DPS Performance shock brings 100 mm of travel to our Split Pivot suspension design for efficient pedaling, predictable braking, and unshakeable traction. The RockShox SID Select+ fork delivers 120 mm of travel up front to help handle rock gardens and roots. With on-bike cargo features such as two-bottle capacity and top tube mounts, Spearfish keeps all your ride essentials at hand so you can focus on the trail ahead, not fumbling with a pack. Shimano's trusted SLX 1 x 12 drivetrain shifts smoothly through its wide gear range, so you won't be thrown off your rhythm by a bad shift.

Horsethief is one bike for many trails. From finessing local loops to savoring new destinations, Horsethief has your back. It’s capable of pushing through technical terrain, instills confidence while riding aggressively, and pairs well with beautiful vistas and a post-ride beverage. - Wheel Size: 29", 27.5+ - Front Axle: 15mm Thru x 110mm - Brake Type: Disc - Fork Type: Suspension - Frame Material: Carbon - TT (Effective): 593 - Rear Axle: 12mm Thru x 157mm - Frame Type: Suspension - Carbon frame and seat stays featuring the Split Pivot suspension design with 120mm of efficient travel, remaining fully active under braking while supportive throughout its travel, paired with a 140mm suspension fork - A short stem paired with a long top tube, combined with a 67-degree head tube angle provides descending confidence, yet balances overall wheelbase length and slow speed maneuverability - Every size fits two full-size bottles in the triangle; Anything Bracket and top tube mounts boost cargo space for pack-free riding bliss - Super Boost 157 x 12mm rear hub spacing combined with a standard width bottom bracket results in a 432mm chainstay length that’s 5mm shorter than previous-generations - Rear flip chip adjusts head tube angle and bottom bracket height for terrain, wheel size, and personal preference - Spec’d with a 29 x 2.5" front and 2.4" rear wheel/tire combination, but can accommodate a range of additional sizes of 27.5 x 2.8 - 3.0" and 29 x 2.2 - 2.6"

For an all-mountain bike with an adventurous side, Blackthorn C XT is the ticket. We designed the stiff carbon fiber frame around progressive geometry that feels planted on descents and climbs. We paired Blackthorn XT's 160 mm Fox Float 36 Performance Elite GRIP2 fork with a 140 mm Fox Float X Performance Elite shock that runs on our Split Pivot suspension platform for excellent small-bump compliance and support. A padded tube strap spot, top tube mount, and bottle mount allow for pack-free riding or extending your range. The Shimano XT 1 x 12 drivetrain and four-piston brakes keep you in control through testing terrain. Blackthorn C XT is a brilliant all-mountain bike equipped for a wide variety of singletrack adventures. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.

We designed Spearfish C XT to be the endurance XC bike of your dreams. Its carbon frame wastes no watts and its progressive XC geometry puts you in position to rail descents and sprint up climbs, making it a fun ride even off the racecourse. The Split Pivot suspension design delivers efficient pedaling, predictable braking, and excellent traction, backed by a Fox Float DPS Performance Elite shock with 100 mm of travel and a RockShox SID Ultimate fork good for 120 mm. Spearfish's on-bike cargo features make long days out easier, and the Shimano XT 1 x 12 componentry is a high-performance group that delivers precise shifts mile after mile.

Cassidy C XT is a well-balanced carbon enduro bike. The stiff frame helps you hold your line through treacherous terrain, while Fox's Float X2 Performance shock and Float 38 Performance Elite GRIP2 soften the trail with 165 mm rear and 180 mm front travel. Progressive trail geometry and our Split Pivot suspension design keep your tires planted both down and up the mountain. On-bike cargo features such as a padded tube strap spot, top tube mount, and full-size bottle clearance support extra laps or longer days out, making Cassidy ideal for enduro adventures. Shimano's XT 1 x 12 components bring smooth shifting, wide range, and four-piston brakes to take it all to the next level. Time to start adding trails to your "must-ride" list. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.

Horsethief is one bike for many trails. From finessing local loops to savoring new destinations, Horsethief has your back. It's capable of pushing through technical terrain, instills confidence while riding aggressively, and pairs well with beautiful vistas and a post-ride beverage. - Wheel Size: 29", 27.5+ - Front Axle: 15mm Thru x 110mm - Brake Type: Disc - Fork Type: Suspension - Frame Material: Carbon - TT (Effective): 615 - Rear Axle: 12mm Thru x 157mm - Frame Type: Suspension - Carbon frame and seat stays featuring the Split Pivot suspension design with 120mm of efficient travel, remaining fully active under braking while supportive throughout its travel, paired with a 140mm suspension fork - A short stem paired with a long top tube, combined with a 67-degree head tube angle provides descending confidence, yet balances overall wheelbase length and slow speed maneuverability - Every size fits two full-size bottles in the triangle; Anything Bracket and top tube mounts boost cargo space for pack-free riding bliss - Super Boost 157 x 12mm rear hub spacing combined with a standard width bottom bracket results in a 432mm chainstay length that's 5mm shorter than previous-generations - Rear flip chip adjusts head tube angle and bottom bracket height for terrain, wheel size, and personal preference - Spec'd with a 29 x 2.5" front and 2.4" rear wheel/tire combination, but can accommodate a range of additional sizes of 27.5 x 2.8 - 3.0" and 29 x 2.2 - 2.6"

Blackthorn C XTR comes equipped for challenging all-mountain terrain. The carbon fiber frame lends the stiffness you need to hold your line. The 140 mm Fox Float X Factory shock and 160 mm Fox Float 36 Factory GRIP2 fork ensure that you can handle just about any feature that's waiting around the next berm. Progressive geometry and our Split Pivot suspension design keep things composed on wicked descents and put you in a position to overcome tough climbs. Our pack-free riding features include a padded tube strap spot, top tube mount, and bottle mount for a lighter load on your back. Shimano's gold-standard XTR 1 x 12 groupset and four-piston brakes make speed modulation as smooth as it gets. All told, we think it's the best all-mountain bike out there—we invite you to see for yourself. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.

The Growler proves that the secret order of hardtail trail shredders is alive and thriving. Sure, it’s got that classic hardtail profile. But 21st-century touches across the platform reveal a future-proofed, instant classic. 29x2.6 tires for ridiculous grip. An aggressive ride character for surprising levels of confidence while descending or ripping tough trails. A refreshingly simple (and tough) package for rowdy days at the trails. More satisfying than a tropical IPA growler fill on a hot day—and way, way faster. Cheers, eh. What sets the Growler apart Holds the line Hardtail isn’t dead—so we went all out in making the Growler as capable, aggressive, and as fast as possible on rowdy, rad trails. Charge hard—the Growler's with ya. Stubborn levels of traction Sure, the Grower rips trails fast. But for technical climbs and loose trail, we opted for big rubber and "dig-the-hell-in" geometry to ensure ridiculous levels of traction and competence over the loose and uneven stuff. So good, it’s stubborn. Monstrously fun We purpose-built the Growler around 29 x 2.6 tires. The result is a fast-rolling, hugely competent, and impossibly fun hardtail machine. Fully-internal cables and a boost rear hub really tie the room together on any trail, too.

Purpose-built to hit the precise sweet spot between lightweight cross country climbing prowess and technical precision, the Element is the best of both worlds and more. New-levels of climbing efficiency guarantees that oh-so-sweet feeling of riding someone off your wheel. Added levels of stability on fast descents and a pseudo-aggressive seat tube angle provides surprising levels of confidence on tight single track and hairy descents. Light. Stiff. Fast. Smooth. Precise. You’re now in your Element—always. Wheel size: - Sizes X-Small: 27.5-inch - Sizes Small – X-Large: 29-inch

If you're looking for one bike that does it all, look no further than the Instinct. We've designed a bike that's capable of tackling technical trail riding but still allows you to push the pedals hard on the climbs. We've updated the geometry, frame features, and suspension kinematics to make sure you feel confident on the up's, down's, and everything in between. Trust your Instinct. Wheel size: - Sizes X-Small – Small: 27.5-inch - Sizes Small – X-Large: 29-inch

Purpose-built to hit the precise sweet spot between lightweight cross country climbing prowess and technical precision, the Element is the best of both worlds and more. New-levels of climbing efficiency guarantees that oh-so-sweet feeling of riding someone off your wheel. Added levels of stability on fast descents and a pseudo-aggressive seat tube angle provides surprising levels of confidence on tight single track and hairy descents. Light. Stiff. Fast. Smooth. Precise. You're now in your Element—always.

Evolution of a Classic This latest iteration of the Trail 429 is evidence of our constant quest for peak performance. We’ve broadened its capabilities without sacrificing its legendary sharpness: slackening the head angle just enough, increasing the reach, and introducing a flip-chip to allow fine-tuning of the geometry toward either the rowdy or racy ends of the spectrum. All-Star Suspension Is it possible for a bike to be both razor-sharp and butter-smooth? Yes. The Trail 429 is proof. In order to wring every drop of potential out of 120mm, we’ve reworked the already stellar dw-link suspension to provide a more bottomless feel and allow for a greater range of tunability. The Trail 429 combines rocket ship pedaling performance with a plushness that genuinely feels like more travel than the numbers indicate. Product Details: - Refined geometry exemplifies the pinnacle of modern race-to-trail performance - New, more progressive dw-link® prioritizes pedaling efficiency yet still rewards riders with plush, controlled travel - 120mm rear suspension travel featuring a vertical trunnion mounted high-volume air shock delivers unprecedented comfort and tunability - Flip chip adjustability allows riders to tailor geometry for either spirited all-round handling or a more progressive and rowdy demeanor - Hassle-free, full-length, internal cable routing with Pivot’s easy-to-service and ultra-quiet Pivot Cable Port System - Fits riders between 4’10” and 6’7” with X-Small to X-Large size offerings - Pivot’s full carbon frame features size-specific ride tuning, leading edge carbon fiber materials, and Pivot’s proprietary hollow core molding technology to ensure that every rider from 4’11” to 6’7” has a bike that feels perfect and performs at the optimum level for their size - Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame

Optimized for the Entire Mountain We tailored every detail of the Switchblade to deliver a bike ready to conquer the entire mountain. Progressive geometry broadens the performance envelope while retaining the versatility that made the original so good. Always with an eye on confidence-inspiring design, we shortened, straightened, and steepened the Switchblade's seat tube to allow longer travel dropper posts. Uncommon Versatility The Switchblade was already a bike ahead of its time and the new Switchblade pushes the versatility envelope even further. It doesn't matter if you want to run 29er wheels, 27.5" X 2.8" plus tires, or even a 29"/27.5" combo – the Switchblade can be perfected for all. Beyond All Mountain The new Switchblade's extraordinary versatility and category-bending capability redefine performance across every type of trail. From bike park flow trails to raw backcountry routes, the Switchblade amplifies every rider's skills and excels on any trail. Product Details: - Ultra-Light Hollow Core Carbon Frame. - 142mm of supple-yet-efficient dw-link™ suspension travel featuring a vertically mounted trunnion metric air shock. - Equipped with a 44mm offset 160 mm-travel Fox 36 Grip2. - Flip Chip for on-trail geometry customization. - Featuring the easy-to-find UDH rear derailleur hanger for peace of mind when traveling. - Hassle-free full internal routing with Pivot cable port system. - Compatible with both 29, 27.5+", and 27.5" rear/29" front (mullet) wheel sizes without compromise thanks to the Flip chip's adjustable geometry feature. - Custom-tuned Fox Live Valve builds allow for layers of tuning for a plusher-than-plush feel unmatched by any other suspension setup. - Large Water Bottle Clearance on all sizes. - Pivot Tool Dock system is compatible with mounts under the top tube and integrated into the underside of the frame.

- Ultra-Light Hollow Core Carbon Frame. - Size Specific Chainstays. - Equipped with a 44mm offset 160mm-travel Fox 36 Grip2. - Flip Chip for on-trail geometry customization. - Featuring the easy to find UDH rear derailleur hanger for peace of mind when traveling. - Hassle-free full internal routing with Pivot cable port system. - Compatible with both 29, 27.5+", and 27.5" rear/29" front (mullet) wheel sizes without compromise thanks to the Flip chip's adjustable geometry feature. - 142mm of supple-yet-efficient dw-link™ suspension travel featuring a vertically mounted trunnion metric air shock. - Large Water Bottle Clearance on all sizes. - Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame.

The Storm picks up where road, gravel, and hybrid bikes can't go – fatter tires, off-road-oriented progressive design, and features that'll give riders the chance to truly experience what mountain biking is truly all about in a bike that won't break the bank. Whether you've found your way back to bike after years away, or are just exploring a new way to ride, the Storm offers quality, performance and accessibility to a wide array of riders, and is the perfect chance to give you the time and versatility to learn what kind of mountain biking is perfect for you! - 6061 Alloy Frame with smooth welds and updated geometry - 100mm Travel Suspension Fork - Internal routing for shifter and brake cables - Increased 2.35" tire fitment - 27.5" and 29" frame options depending on size - Shimano Deore 1x10 Drivetrain w/11-46T Cassette - Maxxis Rekon 2.35" Tires RIDER BENEFITS: - PROGRESSIVE DESIGN: The Storm uses Norco's holistic approach to fit and geometry to achieve its nimble, confident trail performance. The unique combination of longer reach, slacker head tube angle and steep seat tube angle provides a more forward weight distribution within a longer wheelbase. This allows more powerful, efficient pedaling, increased climbing traction and added grip and control when descending to help make the most of every ride. - 100MM TRAVEL SUSPENSION FORKS: Each Storm features 100mm of front suspension travel – the perfect amount for off-road adventure and exploration, without feeling like you're carrying around extra weight or bulk when you don't need it. - INTERNAL ROUTING FOR SHIFTER AND BRAKE CABLES: By routing the brake and shift cables inside the frames, they are out of harm's way and away from the elements. That means shifting and braking performance last longer between services, and the bikes look clean! - 2.35" TIRE CLEARANCE: The Storm series comes equipped with 2.25" tires for a smooth, all-round fast ride, but the frame is designed to take up to 2.35" rubber, so if your adventures start to get a little looser, just throw on some wider tires, and the Storm is good to go! - TWO WHEEL SIZES, ONE BIKE: Depending on what frame size you ride, the Storm is available in a wheel size to suit you. The XS, and S are equipped with 27.5" tires to help fit smaller riders, and the L and XL feature 29" wheels so taller riders can take advantage of their smooth ride. If you're ride a medium, you're in luck! You get to choose either wheel size depending on your preference! Wheel size: - Sizes XX-Small – Medium: 27.5-inch - Sizes Medium – X-Large: 29-inch

The Torrent's modern features and new progressive All-Mountain design provide stable, agile descending, paired with climbing capability that would make a mountain goat jealous – perfect for any rider looking to bring their trail riding to the next level without the extra expense and complexity of rear suspension, and a new challenge for advanced riders trying to keep themselves honest. - New 29" 6061 DB Aluminum Torrent Frame - Progressive All Mountain Hardtail Geometry - Geo based around 150mm short offset 29" fork - Gravity Tune with short responsive chainstays - Slack 64 degree head angle RIDER BENEFITS: - PROGRESSIVE DESIGN: The Torrent uses Norco's holistic approach to fit and geometry to create the ultimate all-mountain hardtail experience. The unique combination of our next generation of Gravity Tune, longer reach, slacker head tube angle and steep seat tube angle provides a more forward weight distribution within a longer wheelbase. This allows more powerful pedaling, increased climbing traction and added grip and control when descending so you can confidently attack the rowdiest trails. - EQUIPPED TO DESCEND: To support riders through the lunacy that the Torrent's inspires, each bike is equipped with 4-piston disc brakes, shorter seat tubes, long-stroke dropper posts and aggressive knobby 29er tires. - BURLY METAL FRAME: For 2021, we decided to offer the Torrent in both steel and highly-engineered aluminum to give you some options for when you're fully committed to a burly line that you're fairly confident you can pull off. Steel has a reputation for being tough and compliant, and when it's engineered right, aluminum does, too.

The Torrent's modern features and new progressive All-Mountain design provide stable, agile descending, paired with climbing capability that would make a mountain goat jealous – perfect for any rider looking to bring their trail riding to the next level without the extra expense and complexity of rear suspension, and a new challenge for advanced riders trying to keep themselves honest. - New 29" 6061 DB Aluminum Torrent Frame - Progressive All Mountain Hardtail Geometry - Geo based around 150mm short offset 29" fork - Gravity Tune with short responsive chainstays - Slack 64 degree head angle RIDER BENEFITS: - PROGRESSIVE DESIGN: The Torrent uses Norco's holistic approach to fit and geometry to create the ultimate all-mountain hardtail experience. The unique combination of our next generation of Gravity Tune, longer reach, slacker head tube angle and steep seat tube angle provides a more forward weight distribution within a longer wheelbase. This allows more powerful pedaling, increased climbing traction and added grip and control when descending so you can confidently attack the rowdiest trails. - EQUIPPED TO DESCEND: To support riders through the lunacy that the Torrent's inspires, each bike is equipped with 4-piston disc brakes, shorter seat tubes, long-stroke dropper posts and aggressive knobby 29er tires. - BURLY METAL FRAME: For 2021, we decided to offer the Torrent in both steel and highly-engineered aluminum to give you some options for when you're fully committed to a burly line that you're fairly confident you can pull off. Steel has a reputation for being tough and compliant, and when it's engineered right, aluminum does, too.

EVERY RIDER, EVERY TRAIL The Norco Fluid can dive into corners. And carve sweeping turns. It's as happy mixing it up in the backwoods, as it is rolling local trails. It can elevate beginner riders to intermediate. And carry intermediates to expert. It can take your weekend hobby and turn it into a lifestyle. While so many bikes are made for a specific something or somebody, what the world needs is a bike built for every rider and every trail. That's the Norco Fluid. RIDER BENEFITS THREAD THE NEEDLE - Intuitive precision handling to pick the perfect line. - Engineered using the same Norco technology and process as our top-tier Trail bikes to give you the ride of your life no matter what path you follow. POTENTIAL FULFILLED - Top-tier design and features over-deliver as skills evolve. - 6061 aluminum frame gives experienced Trail riders what they need to ride their best and helps evolving riders develop new skills and preferences without limits. CUSTOM TUNED SUSPENSION - Sophisticated suspension components for full-platform performance and tunability. - Precision-engineered 130mm rear suspension features custom-tuned dampers co-developed with the shock manufacturers provides fully customized suspension setup and performance for every rider. ROOM TO MOVE - Long-travel droppers and generous standover get you through the rough stuff. - Long-travel, size-specific 34.9mm dropper posts and low-slung top tubes create lots of room to move, letting you roll confidently through challenging terrain and push your limits. PERFORMANCE FOR ALL - Refined design and expanded size range for accessible Trail performance. - Boutique-level fit & finish is available in 5 frame sizes, delivering superior Trail performance to riders between 5'1" and 6'7" with components selected to offer peak performance and durability. RIDE ALIGNED - Perfect fit, dialed handling and personalized setup in minutes. - The Ride Aligned Design System matches each Fluid FS to the human who rides it. - Rider-first geometry and suspension kinematics combine with custom fit and suspension tuning for personalized performance from day one.

The Torrent's modern features and new progressive All-Mountain design provide stable, agile descending, paired with climbing capability that would make a mountain goat jealous – perfect for any rider looking to bring their trail riding to the next level without the extra expense and complexity of rear suspension, and a new challenge for advanced riders trying to keep themselves honest. - 29" 4130 DB Chromo Torrent Frame - Progressive All Mountain Hardtail Geometry - Geo based around 150mm short offset 29" fork - Gravity Tune with short responsive chainstays - Slack 64 degree head angle - Shimano Deore 12spd Drivetrain - Custom Norco Dropper lever - Tubeless ready w/Stan's tape, valves and sealant RIDER BENEFITS: - PROGRESSIVE DESIGN: The Torrent uses Norco's holistic approach to fit and geometry to create the ultimate all-mountain hardtail experience. The unique combination of our next generation of Gravity Tune, longer reach, slacker head tube angle and steep seat tube angle provides a more forward weight distribution within a longer wheelbase. This allows more powerful pedaling, increased climbing traction and added grip and control when descending so you can confidently attack the rowdiest trails. - EQUIPPED TO DESCEND: To support riders through the lunacy that the Torrent's inspires, each bike is equipped with 4-piston disc brakes, shorter seat tubes, long-stroke dropper posts and aggressive knobby 29er tires. - BURLY METAL FRAME: For 2021, we decided to offer the Torrent in both steel and highly-engineered aluminum to give you some options for when you're fully committed to a burly line that you're fairly confident you can pull off. Steel has a reputation for being tough and compliant, and when it's engineered right, aluminum does, too.

The Revolver HT is the pinnacle of modern XC hardtail performance. Its high modulus carbon fiber frame is engineered to make the most of every Watt stomped through its pedals, with a progressive design that reduces fatigue, and provides attack-style handling on descents. If you're looking to win races – whether organized or deep within the part of your mind that you don't talk about at parties - the Revolver HT is what you're looking for. - Revolver Carbon XC frame with 100mm or 120mm fork options - Updated progressive XC geometry - Gravity Tune - 148mm Boost rear end - Tubeless ready with Stan's tape, valves and sealant - X-Fusion RC32 Air 120mm Fork - Shimano Deore 11 Speed Drivetrain RIDER BENEFITS: - RIDE ALIGNED: The Revolver HT uses Norco's Ride Aligned design system which matches each individual bike to the human who rides it, creating a customized platform that is both stable and balanced, allowing the rider to push harder. Using individual rider metrics, optimized geometry and fit and proprietary app technology, you'll align with your ride experience like never before. - LIGHTWEIGHT, STIFF & FAST: The Carbon fiber frame comes in four sizes, weighs in at a scant 1100g with paint (Size M). - MASSIVE CLEARANCE: Boost axle spacing provides gobs of clearance for 29x2.35 tires, so it's not just XC-Race compliant – it'll also rip on the trails to get every mile in that you can before sundown. - ONE-BY SPECIFIC: It's a harsh reality for luddites, but the front derailleur is a thing of the past for XC racers. The Revolver HT is a finely tuned machine, and we've eliminated all the extra fluff to make it the fastest it can be – and part of that is ditching the possibility of running a front derailleur. - RACE CALIBER, TRAIL WORTHY: Revolver HT is spec'd for XC with a lightweight 120mm fork, and also suits the needs of the performance trail rider with a dropper posts and 2.35" tires.

The Norco Fluid FS A2 is built to tackle whatever trail leads to becoming the rider you want to be. Named Pinkbike’s Value Bike of the Year, Vital MTB’s Bike of the Year, and most recently, Bicycling Magazine’s Best Value Trail Bike. GET EVERYTHING OUT OF THE TRAIL THAT YOU PUT INTO IT The Fluid FS A1's 130mm travel is precision engineered, pairing custom tuned suspension components with 140mm fork travel and boutique level fit & finish for maximum Trail performance & potential. DETAILS - Top-tier design and features over-deliver as skills evolve. - High performance, tunable suspension. - Long-travel droppers and generous standover. - Refined design and expanded size range. - Ride Aligned™ Design System & personalized setup.

The Optic 2 SRAM is an aggressive short-travel sled that rips on descents and can get back to the top without a gondola. The Optic C2 SRAM sharpens your view on high speed trails. The precision suspension kinematics and custom DH spec shock creates 125mm of rear travel, matched with a gravity-eating 140mm fork for the control you need to keep your mind on the trail ahead. Reason's It's Rad - Fast never felt this fun. - Designed to work so you can play. - Components selected with speed on the brain. - Matching each Optic to the human who rides it.

The Sight A3 boosts your All-Mountain confidence with incredible descending capability, adept, sure-footed climbing, and efficient pedaling. To make the Sight Aluminum, we had to re-think how you connect with the trail. With maximum front and rear wheel grip on climbs and descents, Sight A3 maintains momentum and cadence in technical situations and allows the suspension to move freely without absorbing drivetrain energy. Reasons It's Rad: - Precise tune and fit perfects every ride. - Max standover with long travel dropper posts. - Sweating the little stuff makes the ride better. - Four piston brakes with 200/180mm rotors. - Features the Ride Aligned Design System. Wheel size: Sizes Small – X-Large: 27.5-inch or 29-inch

The Norco Fluid FS A1 is built to tackle whatever trail leads to becoming the rider you want to be. Named Pinkbike’s Value Bike of the Year, Vital MTB’s Bike of the Year, and most recently, Bicycling Magazine’s Best Value Trail Bike. GET EVERYTHING OUT OF THE TRAIL THAT YOU PUT INTO IT The Fluid FS A1's 130mm travel is precision engineered, pairing custom tuned suspension components with 140mm fork travel and boutique level fit & finish for maximum Trail performance & potential. DETAILS - Top-tier design and features over-deliver as skills evolve. - High performance, tunable suspension. - Long-travel droppers and generous standover. - Refined design and expanded size range. - Ride Aligned™ Design System & personalized setup.

Lighten Up Everything Fluid FS, Now in Carbon Upping the ante on everybody's favourite Trail rig, the Fluid FS Carbon features a 600g lighter main triangle with all the strength and fine-tuned potential that experienced or evolving riders need. Right now, and down the trail, too. - Fluid FS Carbon - Intended Use: Trail - Frame Material: Carbon Main, 6061 Alu Stays - Frame / Wheel Size: S, M, L, XL / 29" - Suspension Travel – F: 140mm R: 130mm - Suspension Platform: Horst Link - Tire Size: 2.35" – 2.6" Additional Features - Ride Aligned Design System - Long Travel Dropper Posts (Up To 200mm) - Low Standover - Custom Tuned Rear Shock - Integrated Accessory Mount Hero-Thread the Needle Intuitive, precision handling to pick the perfect line. - Fluid's geometry, suspension kinematics and precision setup have achieved near-legendary status – so why mess with a success? Fluid Carbon delivers the goods on all types of trails with a little less junk in the trunk. Hero-Pushing the Envelope Design & features that'll continue to impress as skills progress. - Refining the ride and dropping 600 grams from a Trail frame benefits everyone – but only if it's up to the task. The Fluid Carbon aced every test we subjected it to-in the lab, and on the trail. Hero-Custom Tuned Suspension Sophisticated suspension components for precision performance. - Precision-engineered 130mm rear suspension features custom-tuned damping co-developed with shock manufacturers to provide a fully customized suspension setup and performance. Hero-Room to Move Long-travel droppers and generous standover get you through the rough stuff. - Long-travel, size-specific 34.9mm dropper posts, and low-slung top tubes create lots of room to move, letting you roll confidently through challenging terrain. Hero-You Ask, Fluid Answers Refined design for ultimate Trail performance. - With balanced, progressive geometry, kinematics and superior pedal efficiency, Fluid FS Carbon tackles technical terrain with confidence, and attacks high speed pedaling sections with a big ol' grin. Hero-Ride Aligned Perfect fit, dialed handling and personalized setup in minutes. - The Ride Aligned Design System matches each Fluid FS Carbon to the human who rides it. Rider-first geometry and suspension kinematics are precision tuned in minutes with the Ride Aligned Bike Setup Guide.

The Optic C3 is an aggressive short-travel sled that rips on descents and can get back to the top without a gondola. The Optic C3 sharpens your view on high speed trails. The precision suspension kinematics and custom DH spec shock creates 125mm of rear travel, matched with a gravity-eating 140mm fork for the control you need to keep your mind on the trail ahead. Reasons It's Rad: - Fast never felt this fun. - Designed to work so you can play. - Components selected with speed on the brain. - Matching each Optic to the human who rides it.